STEPFOC Starter Kit

Ideal for experimenting and getting started with advanced motor control techniques. This kit provides all you need to have to start using STEPFOC stepper driver with any stepper motor!

Included

• STEPFOC Stepper Controller
• CANvas USB to CAN adapter
• USB to Serial adapter
  
• Stlink v2 with JTAG Programming Adapter 1.27 pitch
  
• 1 x JST SH 1.0 4-pin UART cable
• 1 x XH 2.54MM 2PIN power cable
• 1 x JST ZH 1.5MM 2PIN CAN cable
  
• 6x2.5mm Diametrical Neodymium Magnet
  
• 100K NTC Thermistor

You will need

• A Stepper motor like: Link, Link, Link, Link
• A 12-24V power source (PSU or battery)
• USB-C cable
• PC or Single Board Computer